Details
Plus Co2 Cannon Co2 Jet
The PLUS CO2 CANNON CO2 JET™ provides the ultimate functionality for DJs, event producers, production companies, entertainers, musicians, sporting events and popular venues. The Co2 Cannon Plus Co2 Cryo Jet shoots plumes of Co2 that extends as far as 40+ feet into the air. This is a powerful piece of equipment for amazing special effects that also projects plumes of Co2 in extreme widths.
Using The Plus Co2 Cannon Co2 Jet
Clients looking to control their Plus Co2 Cannon Co2 Jet without DMX, simply set the three way switch on the back to "Power". On this setting, when the fixture receives power, the Co2 valve will open, and when power is not applied, the Co2 valve will close. This is ideal for use with a power strip, relay pack, or any other controllable power source.
The weight of the Plus Co2 Cannon Co2 jet is designed to keep the co2 jet in place while in use. However, each application is unique, so the base has pre-drilled holes, allowing a clamp to be attached, so the co2 fixture can be hung from trussing.
This Plus Co2 Cannon Co2 jet's nozzle can be angled up to 90 degrees, so you can aim them any direction you wish. Straight forward / outwards, at a 45 degree angle, or vertically. The possibilities are endless, especially when using multiple units together.
IMPORTANT: The nozzle angle feature is preferred over the entire jet being angled as the moisture accumulating inside the Co2 Jet can short the circuitry on those NON CO2 CANNON Brand co2 jets that angle in full, without nozzle adjustment. Of course other Co2 Cannon brand jets that angle in full take this into consideration within their internal design to prevent this from happening. Competitors DO NOT!
The locking Neutrik power con cords make transportation and setup easy. Never again worry about the power being unplugged unexpectedly. You can also utilize the power con power output, and daisy chain power to multiple jets.
The Plus Co2 Cannon Co2 Jet accepts voltages of 110vac or 220vac, making it suitable for customers anywhere in the world!
The Plus Co2 Cannon Co2 Jets do not have Co2 passthrough. Co2 passthrough can greatly diminish the output of Co2 from your Co2 Jet System since there are multiple jets on one line. Because of this, each jet has a co2 input only, however you can daisy chain Co2 jets or split off of one Co2 Tank so you can run up to 4 jets together off 1 co2 tank!
The Plus Co2 Cannon Co2 Jet comes equipped with a high pressure selectable length Co2 hose, (6, 8, 10, 15, 20, 25, 35 & 50 Foot Hoses also available, as well as any custom length made same day in shop), equipped with a quick connect fitting for easy setup & takedown. Each co2 jet also includes a Co2 tank attachment tool and 5 extra Co2 washers.
It is no surprise that the Co2 Cannon® products are used by the worlds biggest Artists, Events, Festivals and Theatrical Productions.
PLEASE NOTE: A Siphon Co2 Tank is required for the Co2 Cannon Co2 Jet to operate properly. More info about Co2 is listed below.
Special Features of the Plus Co2 Cannon Co2 Cryo Jet
- Quick connect fitting
- DMX capable
- Compact design
- Portable
- Warranty included
Getting the Plus Co2 Cannon Co2 Jet
Elite DJs, high-energy production companies, event producers, and stage managers may get more information about the Plus Co2 Cannon® Co2 Jet, Co2 Tanks and other types of special effects equipment with a sales representative from Co2 Cannon.
*BEWARE OF OTHER COMPANIES SELLING CHEAP NON-CO2 CANNON BRAND CO2 GUNS and CO2 Jets*
- THE CO2 CANNON IS 100% DESIGNED, TESTED AND ASSEMBLED IN THE USA.
- WE ONLY USE COMPONENTS MANUFACTURED IN THE USA.
- WE TAKE PRIDE IN PROVIDING THE HIGHEST QUALITY PRODUCTS.
Additional Information
| Weight (lbs) | 8.1571 |
|---|---|
| Weight (kgs) | 3.7 |
| Model | Plus Co2 Cannon Co2 Jet |
| Height | 7 Inches (17.7cm) |
| Length | 11 inches (27.9cm) |
| Width | 5 inches (12.7cm) |
| Output | this jet projects a 30-40+ foot plume of CO2 |
| Size and Type | No |
| Operation | 2 Modes: DMX & Power On/Off |
| DMX Channels | 2 Channel (CH1- On/Off | CH2-Length of ON) |
| Linkable | YES |
| Power | 250W |
| Voltage | AC100-120V 60Hz; AC220-240V 50Hz |
| Power Cord Length | No |
| Tank Height | No |
| Tank Width | No |
| Tank Weight | No |
| Tank Material | No |
| Tank Color | No |
| Tank Style | No |
| Tank Capacity | No |
| Tank Valve Outlet Orientation | No |
| Temperature Rating | No |
| Range of Motion | No |
| LED Count | Not Supported |
| LED Color | Not Supported |
| LED Wattage | Not Supported |
| Reach | this jet projects a 30-40+ foot plume of CO2 |
| Nozzle Material | No |
| Pressure Rating | No |
| Hose Length | No |
| Warranty (Tank) | Not Included |
Write Your Own Review
CO2 Cannon offers our international customers a flat rate shipping of $48.00 anywhere in the world. Please note that any customs declaration and home postal delivery times depend on the home country postal service and international laws. Please make sure that you can clear your package with customs and have proper identifiacation and permits where required by law.
Our international Co2 tank fitting is automatically installed with products shipped outside of USA, Canada, Mexico & South America.
If you have questions please email us.
Co2 Fittings:
We will place the correct Co2 Fitting on your order based on the SHIPPING address. So if your order is shipping to the USA, a US Co2 Fitting will be placed on your order. If it is shipping outside the USA, the correct Co2 Fitting will be used for your shipping destination. Please message us if you are requesting a different fitting.
NOTE: OUR Co2 Tool IS compatible with ALL Co2 Tank Fittings, US or Not, that come from Co2 Cannon LLC.
The Co2 Cannon can be used with any Siphon CO2 Tank (Sometime referred to as a Siphon Tube or Dip Tank). The Co2 Cannon will not operate properly with a standard Co2 tank, so you must be sure you are using a Siphon Tank.
CO2 is readily available from any local gas or welding supplier. We recommend using a 20lb or 50lb tank with your Co2 Cannon. The larger the tank, the more you can use you Co2 Cannon. You will get approximately 1-2 seconds of spray for each pound of your tanks capacity. If you have questions about getting a CO2 tank, or need advice on a supplier, feel free to email us: [email protected]
Co2 Information:
All Co2 Cannon LLC Products require a "Siphon Tube Co2 Tank", also called a "Dip Tube Co2 Tank". These tanks are available at your local welding gas supplier, or other national companies such as Airgas, Praxair, or any other "Co2 Gas Supplier". On average, your Co2 Cannon uses 1 lb of Co2 every 2 seconds of spray, which costs anywhere from $1-$1.30 per pound, depending on area and other factors. If you have any questions, we're just a call away: 929-269-2266
Tanks:
A Siphon Co2 Tank is required for the Co2 Cannon to operate properly. More info about Co2 is listed below. Check out the video at the bottom of the page to see it in action!
All USA orders over $100 qualify for free shipping, using UPS ground. Estimated delivery times can be seen by expanding the image on the right. If you would like to upgrade to a faster shipping method, expedited options will be displayed during the checkout process, once you enter the shipping address.
All Co2 Cannon stage equipment products come with a 1 year parts and labor warranty. If you need to make a warranty claim, please email us. Find out more information about our warranty policy can be found on the Terms and Conditions page. Click Here to access the Terms and Conditions Page.
Why Choose "Co2 Cannon LLC"?:
-
Our Co2 Cannons are the most sought after in the industry.
-
The Highest Customer Service and 100% Customer Satisfaction is our standard.
-
Our Co2 Cannons are made with the highest quality materials
-
We offer FREE shipping on all US orders.
-
Products are ALWAYS in stock and can ship SAME DAY!
