CO2 CANNON – PLUS CO2 CRYO JET™

$489.99

INTRODUCING ONE OF THE MOST ECONOMICAL POWER CO2 JETS: CO2 CANNON ® – PLUS CO2 CRYO JET™ IN THE ENTERTAINMENT INDUSTRY. THE PLUS CO2 JET™, ALSO REFERRED TO AS THE PLUS CO2 CANNON OR DMX CO2 JET, IS A SPECIAL EFFECT SMOKE GENERATOR WHICH CAN SHOOT PLUMES OF CO2 CRYO SMOKE UP TO 40 FEET AND 16 INCHES WIDE INTO THE AIR.

The Co2 Cannon Co2 Jet is a stationary Co2 fixture used to create extraordinary special effects. This Co2 Jet produces a 30-40 + foot plume of ice cold fog!

You can control your Plus Co2 Cannon Jet with DMX or power on/off (no dmx). The new digital DMX interface makes addressing and controlling your Plus Co2 Cannon Co2 Jet fast and easy. Each button on the back of the fixture controls specific settings, meaning you can set your DMX address in seconds. Every Plus Co2 Cannon Co2 Jet can be configured with 3 pin or 5 pin Neutrik DMX connections.

Additional Options

Voltage

Power Cord Length

Co2 Custom Hose - Industrial Cryogenic Grade - Made in USA

Product price: $489.99
Total options:
Order total:

Description

The PLUS CO2 CANNON CO2 JET™ provides the ultimate functionality for DJs, event producers, production companies, entertainers, musicians, sporting events and popular venues. The Co2 Cannon Plus Co2 Cryo Jet shoots plumes of Co2 that extends as far as 40+ feet into the air. This is a powerful piece of equipment for amazing special effects that also projects plumes of Co2 in extreme widths.

Using The Plus Co2 Cannon Co2 Jet

Clients looking to control their Plus Co2 Cannon Co2 Jet without DMX, simply set the three way switch on the back to “Power”. On this setting, when the fixture receives power, the Co2 valve will open, and when power is not applied, the Co2 valve will close. This is ideal for use with a power strip, relay pack, or any other controllable power source.

The weight of the Plus Co2 Cannon Co2 jet is designed to keep the co2 jet in place while in use. However, each application is unique, so the base has pre-drilled holes, allowing a clamp to be attached, so the co2 fixture can be hung from trussing.

This Plus Co2 Cannon Co2 jet’s nozzle can be angled up to 90 degrees, so you can aim them any direction you wish. Straight forward / outwards, at a 45 degree angle, or vertically. The possibilities are endless, especially when using multiple units together.

IMPORTANT: The nozzle angle feature is preferred over the entire jet being angled as the moisture accumulating inside the Co2 Jet can short the circuitry on those NON CO2 CANNON Brand co2 jets that angle in full, without nozzle adjustment. Of course other Co2 Cannon brand jets that angle in full take this into consideration within their internal design to prevent this from happening. Competitors DO NOT!

The locking Neutrik power con cords make transportation and setup easy. Never again worry about the power being unplugged unexpectedly. You can also utilize the power con power output, and daisy chain power to multiple jets.

The Plus Co2 Cannon Co2 Jet accepts voltages of 110vac or 220vac, making it suitable for customers anywhere in the world!

The Plus Co2 Cannon Co2 Jets do not have Co2 passthrough. Co2 passthrough can greatly diminish the output of Co2 from your Co2 Jet System since there are multiple jets on one line. Because of this, each jet has a co2 input only, however you can daisy chain Co2 jets or split off of one Co2 Tank so you can run up to 4 jets together off 1 co2 tank!

The Plus Co2 Cannon Co2 Jet comes equipped with a high pressure selectable length Co2 hose, (6, 8, 10, 15, 20, 25, 35 & 50 Foot Hoses also available, as well as any custom length made same day in shop), equipped with a quick connect fitting for easy setup & takedown. Each co2 jet also includes a Co2 tank attachment tool and 5 extra Co2 washers.

It is no surprise that the Co2 Cannon® products are used by the worlds biggest Artists, Events, Festivals and Theatrical Productions.

PLEASE NOTE: A Siphon Co2 Tank is required for the Co2 Cannon Co2 Jet to operate properly. More info about Co2 is listed below.

Special Features of the Plus Co2 Cannon Co2 Cryo Jet

  • Quick connect fitting
  • DMX capable
  • Compact design
  • Portable
  • Warranty included

Getting the Plus Co2 Cannon Co2 Jet

Elite DJs, high-energy production companies, event producers, and stage managers may get more information about the Plus Co2 Cannon® Co2 Jet, Co2 Tanks and other types of special effects equipment with a sales representative from Co2 Cannon.

*BEWARE OF OTHER COMPANIES SELLING CHEAP NON-CO2 CANNON BRAND CO2 GUNS and CO2 Jets*

  • THE CO2 CANNON IS 100% DESIGNED, TESTED AND ASSEMBLED IN THE USA.
  • WE ONLY USE COMPONENTS MANUFACTURED IN THE USA.
  • WE TAKE PRIDE IN PROVIDING THE HIGHEST QUALITY PRODUCTS.

Additional information

Weight (lbs)

8.1571

Weight (kgs)

3.7

Model

Plus Co2 Cannon Co2 Jet

Height

7 Inches (17.7cm)

Length

11 inches (27.9cm)

Width

5 inches (12.7cm)

Output

this jet projects a 30-40+ foot plume of CO2

Size and Type

No

Operation

2 Modes: DMX & Power On/Off

DMX Channels

2 Channel (CH1- On/Off, CH2-Length of ON)

Linkable

YES

Power

250W

Voltage

AC100-120V 60Hz; AC220-240V 50Hz

Power Cord Length

No

Tank Height

No

Tank Weight

No

Tank Material

No

Tank Color

No

Tank Style

No

Tank Capacity

No

Tank Valve Outlet Orientation

No

Temperature Rating

No

Range of Motion

No

LED Count

Not Supported

LED Color

Not Supported

LED Wattage

Not Supported

Reach

this jet projects a 30-40+ foot plume of CO2

Nozzle Material

No

Pressure Rating

No

Hose Length

No

Warranty (Tank)

No

You’re reviewing: CO2 CANNON – MEGA LED CO2 CRYO JET ™

Error: Contact form not found.

All Co2 Cannon are required to be used with a Siphon CO2 Tank (also referred to as a Siphon Tube or Dip Tank). Co2 Cannons will not operate properly with a standard CO2 tank, therefore be sure you are using a Siphon Tank.

 

Co2 is readily available from any local gas or welding supplier. Most popular sizes of Co2 tanks used are 20lb co2 tank (40seconds) or 50lb co2 tank (60-80 seconds). In general you get 1-2 seconds of effect for each pound of of Co2. For questions on Co2 availability contact CryoFX.

Orders are shipped in the order received. All customers have front of line service offered to them which bumps your order ahead of others. Additional details located here.

Our international CO2 tank fitting is automatically installed with products shipped outside of USA, Canada, Mexico & South America. International shipments typically arrive in 3-5 business days. If you are looking to order products, and our website does not support shipping to your country, please email us.

All Co2 Cannon products come with a 1 year parts and labor warranty. If you need to make a warranty claim, please email us. Additional warranty information can be found on the Warranty page.